The visual appeal, strength, wide cover, light weight and weather resistance of Stramit Monoclad® cladding make it perfect for all commercial roofing and walling applications. Its excellent strength and ease of assembly allow for long, economical spans. The large water-carrying capacity and weather-tightness permit very low roof pitches, leading to economies in the building structure.
Features/Benefits
Economical – unique blend of characteristics provides a low installed cost
Simple Installation – through fixing and easy notching of flashings
762mm Cover – quick installation and easy handling
Hi-tensile Steel – lightweight and high strength
Deep Ribs – provide excellent spanning capability with good water carrying capacity
The visual appeal, strength, wide cover, light weight and weather resistance of Stramit Speed Deck Ultra® decking make it perfect for all commercial roofing applications. Its excellent strength and ease of assembly allow for long, economical spans. The large water-carrying capacity and weather-tightness permit very low roof pitches, leading to economies in the building structure.
Stramit Speed Deck Ultra®decking may also be used for domestic applications.
Features/Benefits
Wide Cover – fewer sheets and quicker installation
Deep Ribs – stronger with better water carrying capacity; roof slopes as low as 1°
Full Length Clips – to locate ribs and compress insulation
Four Fixing Points Per Clip – with centralised fastening for unsurpassed strength.
Hexagon Head Screws – bigger, stronger and easier to install, with less wastage
The striking linearity, strength, wide cover, light weight and weather resistance of Stramit Longspan cladding make it perfect for many commercial roofing and walling applications. Its excellent strength and ease of assembly allow for long, economical spans. The good water-carrying capacity and weather-tightness permit very low roof pitches, leading to economies in the building structure.Stramit Longspan® cladding is also used for domestic applications, where a strong but uniform appearance is desired.
Features/Benefits
700mm Cover – quick installation and easy handling
Easy Fixing – conventional through fixed screws maximise performance and installation
Hi-Tensile Steel – light weight and high strength with improved damage resistance
Design Flexibility – long lengths and anti-capillary side laps enable Stramit® Longspan cladding to be used effectively on applications from vertical wall cladding and fascias to roofs with pitch as low as 1.5°
Fully Tested – a full range of load performance tables to suit most applications
Extended Spans – strength and rigidity of the profile allows economical construction
Available in Colorbond, Zincalume, Galvanise & Ultra.
Cut to length up to 30metres.
Available in .42bmt or .48bmt thickness
Select options
This product has multiple variants. The options may be chosen on the product page
A strikingly deep roof and wall cladding with corrugations 120% deeper and 50% wider than traditional corrugated profiles perfectly suited to in modern industrial, commercial, residential and recreational buildings
Features/Benefits
Offers improved resistance to damage
Long spanning capacity
Nominal cover width: 724mm
Minimum roof slope: 2°
Available in Limited Colorbond Colours, Zincalume & Colorbond MATT Monument (only)
Cut to length up to 23 metres
Available in .48bmt thickness.
Select options
This product has multiple variants. The options may be chosen on the product page
An attractive yet strong solution for both interior and exterior walling applications. Simple clips are used for fixing the start of the first sheet; subsequent sheets are nailed or screwed.
Features/ Benefits
High impact resistance
Sheets can run vertically or horizontally
Nominal cover width: 300mm
Available in standard Colorbond colour range & Zincalume.
Cut to length up to 9.760 metres
Select options
This product has multiple variants. The options may be chosen on the product page
A modern cladding well suited to many types of home improvement projects such as room additions, carports and patios. The underside features clean uninterrupted lines, with an attractive gloss finish.
Features/ Benefits
Ideal for open sided structures where a high degree of watertightness is not required
Perfect for creating a flat, ceiling like finish
Nominal cover width: 250mm
Minimum roof slope: 2°
Available in limited double sided Colorbond colour range
Cut to length up to 9 metres
Select options
This product has multiple variants. The options may be chosen on the product page
Strong, versatile long-length roofing or walling. The concealed fastening method enables its use on many applications from low pitched roofs to vertical or horizontal ribbed walling.
Features/Benefits
Fixing clips secure sheets without puncturing
No exposed fasteners for clean, smooth lines
Nominal cover width: 406mm
Minimum roof slope: 1°
Available in .48 only
Cut to length up to 20 metres
Available in limited Colorbond Colour range & Zincalume
Select options
This product has multiple variants. The options may be chosen on the product page
An advancement of the original concealed fix roof cladding with bold ribs making a strong visual statement rising from flat pans. It is a superior product which has earned FM Global approval.
Features/Benefits
Concealed fixed offering supreme watertightness
Can be used with LOK-KLIP® end and expansion joint system
Nominal cover width: 700mm
Minimum roof slope: 1° (subject to design provisions being met)
Available in standard Colorbond colour range, Ultra, Metallic & Zincalume
Cut to length up to 35 metres
Available in .42bmt or .48bmt
Select options
This product has multiple variants. The options may be chosen on the product page
LYSAGHT LONGLINE 305® is a concealed-fixed roof cladding with bold ribs and wide pans. The standing seam ribs make a bold architectural statement, while maximising water tightness. It is available in three styles:
[list_bullet]
plain (flat pans)
fluted (small creases in the centre of the pan)
tapered (pan-width reduced by up to 50% of normal width at one end) for a sweeping fan effect, allowing curved and rounded roof shapes to be clad with ribs radiating from a central point.
[/list_bullet]
It is a simple, low cost fixing that is fast, economical and effective. May be used on roof pitches as low as 1 degree (1 in 50).
Select options
This product has multiple variants. The options may be chosen on the product page
Mini-corrugated wall cladding suitable for use on interior and exterior applications. This subtle profile is a perfect complement to other LYSAGHT® roofing and walling claddings to provide a contrasting surface as an accent feature.
Features/ Benefits
Perfect for decorative walls and ceilings
Suitable for flat and curved installations
Corrugations can run vertically or horizontally
Nominal cover width: 820mm.
Available in standard Colorbond colour range & Zincalume.
Cut to length up to 6metres
Select options
This product has multiple variants. The options may be chosen on the product page
An attractive trapezoidal multi-ribbed profile generally used where an inexpensive, quick to install cladding is desirable, such as garages, carports and sheds, or for commercial and industrial projects such as warehouses, showrooms and retail premises.
Features/ Benefits
Ribs can run vertically or horizontally
Lightweight and quick to install
Nominal cover width: 840mm
Available in standard Colorbond colour range & Zincalume.
Cut to length up to 8 metres
Available in .35bmt or .42bmt
Select options
This product has multiple variants. The options may be chosen on the product page
A subtle fluted wall cladding profile ideal for applications where a near flat surface are required. The longitudinal flutes provide rigidity along the length of the sheet while retaining full flexibility across the width.
Features/ Benefits
Suitable for use as eaves on a residential building
Can be used flat or curved
Flutes can run vertically or horizontally
Nominal cover width: 850mm
Available in standard Colorbond colour range & Zincalume
Cut to length up to 8 metres
Available in .42bmt or .35bmt
Select options
This product has multiple variants. The options may be chosen on the product page
A modern, simple square-corrugated roofing and walling cladding that is strong, impact resistant and economical – ideal for both commercial and residential applications.
Features/Benefits
Highly serviceable roofing and walling cladding
Bold ribs offer high strength and high water carrying capacity
Nominal cover width: 700mm
Minimum roof slope: 2°*
Available in Colorbond, Ultra, MATT, Metallic, Double sided Colorbond& Zincalume
Cut to length up to 27.9 metres
Available in .42bmt or .48bmt
*For roof slopes down to 2° a number of provisions and details will need to be adhered to. Please call your nearest Lysaght branch for advice.
Select options
This product has multiple variants. The options may be chosen on the product page
Versatile roof and wall cladding featuring bold, trapezoidal ribs and subtle fluting in the pans. Ideal for commercial, industrial and residential buildings.
Features/Benefits
Long spanning cladding permitting wide support spacing
Can be used with TRIM-KLIP™ end and expansion joint system
Nominal cover width: 762mm
Minimum roof slope: 2°
Available in .42bmt & .48bmt
Cut to length up to 35 metres
Available in Colorbond, Zincalume, Ultra, MATT, Double sided(limited colours)
